Spring and Channel Nuts

Spring Nuts

• Spring Nuts primary use is to attach StrutTech
  fittings to the open face of channels
• Nut is molded with integral spring and seats
  into channel notches
• Spring nut can be installed at any location from
  the open side of the channel
• Highly Corrosion Resistant. See Chemical Resistant Guide
• Standard Material is Polyurethane

Spring Nut Order Information

Note: Standard quantity 25 each

Spring Nut Bolts Order Information

Note: Standard quantity 25 each
To order 316 Stainless bolts, substitute SS for PU in
above part numbers

Channel Nuts

• Channel Nuts can be used for attaching
  StrutTech fittings to the open or back
  side of channel
• Nuts are also used to “double nut”
  threaded rod to channels
• Channel Nuts will not rotate in the
  channel
• Channel Nut can only be installed by
  sliding the nut into position from the
  end of the channel
• Material is Polyurethane (PU)